1, installation location to keep ventilated, generator end should have enough inlet, diesel engine side should have a good outlet. Outlet area should be greater than the water tank area of more than 1.5 times. Around
2, installation should be kept clean, avoid place nearby can produce acidic and alkali corrosive gas and steam. Conditional should configure extinguishing equipment.
3, if used indoors, exhaust pipes must be to outdoor, pipe diameter must be of silencer or out of the pipe diameter, pipe joint by the Angle of not more than three, to ensure that the smoke flow, and the pipe should be down 5-10 degrees, to avoid the rain water injection; If the exhaust pipe is vertical installation, you must add cover.
4, basic using concrete, when installation should be tested according to the spirit level, levelness, fixed on the level of generating unit. On the basis of Should have special shockproof pad or between unit and foundation with foot bolt. Unit
5, the shell must be reliable grounding protection and the need to have neutral directly grounding of the generator, is a professional must carries on the neutral point grounding, and equipped with lightning protection devices, it is strictly prohibited the use of neutral point earthing device of electric directly grounded.
6, generator and mains switches must be very reliable, in case of sending. The two-way switch wiring reliability needs to be approved by the local power supply departments of inspection.
7, starting battery connection must be strong.
